How To Use Pipe Roll Grooving Machine

Pipe Roll Grooving Machine is composed of hydraulic hand pump, high pressure oil pipe, oil pipe joint, and main body connection of Pipe Roll Grooving Machine. When using Pipe Roll Grooving Machine, select a suitable hole-opening die according to the technical parameters. Install the male die on the piston rod and the female die on the hexagonal screw sleeve. Use the inner hexagonal wrench to tighten the piston rod and the hexagonal screw sleeve. M8 taper end set screw. After fixing the mold, follow the procedure below.

Put the main body of the Pipe Roll Grooving Machine on the rail that needs to be drilled, adjust the hole position according to the hole distance of the rail connecting plate and the ruler on the main body of the Pipe Roll Grooving Machine, then screw the hexagonal screw sleeve under the ruler to the rail Position the holed female mold tightly. Tighten the stop valve of the hand pump, loosen the vent plug on the hand oil tank, and press the handle of the hand pump. When you hear the crisp sound of cutting holes, the holes have been opened. At this time, loosen the stop valve of the hand pump, and the piston rod of the oil cylinder drives the male mold to return to its original position. At the same time, the hexagon screw sleeve under the ruler is reversely loosened to keep the female mold away from the rail. When the second hole needs to be opened, just measure the center distance between the hole and the hole, and continue according to the operation procedure of opening the first hole.

Pipe Roll Grooving Machine is light, beautiful and easy to carry. It can be used for metallurgy, petroleum, chemical, electronics, electrical, shipbuilding, machinery and other industries to install and maintain the openings of wires, pipes, indicator lights, instrument switches, etc., and is more suitable for molding. The bottom plate of the instrument panel and the wall surface of the switch box branch electrical box are used for opening holes.

Pipe Roll Grooving Machine is an advanced manual hydraulic tool that can drill holes on metal plates below 4mm. It can perform hole drilling that cannot be achieved by ordinary stamping equipment. It is easy to operate, labor-saving, fast, and the processing surface is smooth and clean, and it can be used regardless of site or location restrictions.